J.Thomas JRCO ZTR Mower Attachments

JRCO Attachments
Tine rake detHatcher
The Tine Rake dethatcher fits most brand name commercial walkbehind and riding mowers. The rake quickly attaches to the universal mount bar with
clevis pins. The universal mount bar is included.

Whether you mulch or bag, the dethatcher can be used throughout the growing season as a tool to control thatch accumulation and reduce the chance of turf disease.

Spring: Use the dethatcher for the first mowing of spring to remove thatch, embedded leaves and debris. The patented tines lift thatch without damaging healthy turfgrass and at the same time comb matted grass giving the lawn a clean, hand-raked appearance.

Summer: After a hot summer, use the dethatcher to surface
aerate the soil. This promotes root development and makes
room for thicker turfgrass.

Fall: Use the dethatcher for the last mowing of the fall leaving a picture perfect, clean lawn.
JR-101 36" 36-1/2" 27
JR-102 46" 46-1/2" 35
JR-103 60" 61-1/2" 47
When ordering Rake Dethatcher, you will need to supply the following information:
• Manufacturer of Mower • Model # and Serial Number of Mower
• Deck Size • Type of Deck/Model • Type of Collection/Bagging System
JR-104 Replacement Double Loop TInes (Qty.
Hooker™
Aerator
The Hooker™ Aerator has zero-turn maneuverability for tight areas.The front mount aerator attaches to the universal mount bar with two clevis pins. The universal mount bar is NOT included, but sold separately.
An electric actuator lifts the heads for transport.

• Aerating width: 38"
• Aeration pattern: 5" x 6" – up to 6 holes/sq. ft.
• Hole size: approximately 1/2"W x 1-1/4"L x up to 3"D
• Tines: 3/8"W x 3"L – heat treated alloy steel
• Tine configuration: 4 tines/rotor, 2 rotors/caster, and
3 casters/aerator
• Productivity: 66,000 sq. ft./hour at 5 MPH

Tines pierce deep into the soil, hooking and lifting
loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The 6 floating rotor heads independently lift over tree roots and rocks while
the other heads continue to aerate.
JR-105 Hooker™ Aerator
JR-106 Universal Mount Bar
When ordering the Hooker Aerator, you will need to supply the following information:
• Manufacturer of Mower • Model # and Serial Number of Mower
• Deck Size • Type of Deck/Model • Type of Collection/Bagging System
JR-108 Replacement Right Hand Tine Set
JR-107 Replacement Left Hand Tine Set

Leaf blade™ plow
The Leaf Blade™ is a 55" wide plow that uses the mower’s power to quickly move piles of leaves. The one piece galvanized steel blade has supports at the top, center and bottom for durability. The front mount plow attaches to the universal mount bar with two clevis pins. The universal mount bar is NOT included, but sold separately. Save time and labor for fall clean-up!

The Leaf Blade™ rides on two adjustable caster wheels. Flat 4-1/2" long stainless spring steel tines allow the leaf blade to push leaves on uneven
surfaces without damaging turfgrass.
JR-109 Leaf Blade™ Plow
JR-106 Universal Mount Bar
When ordering the Leaf Blade Plow, you will need to supply the following information:
• Manufacturer of Mower • Model # and Serial Number of Mower
• Deck Size • Type of Deck/Model • Type of Collection/Bagging System